ELECTRIC POWER TOOLS - Magnetic Drill Press 

D1 Magnetic Base Drill
The D1 is an ultra compact magnetic drilling machine with maximum capacity of 1-3/8" diameter in 2" thick material. The unit features an ultra light weight of 22 lbs. A maintenance free rail guide travel system eliminates the necessity for alignment, maintains accuracy and reduces cutter breakage.

The D1 is equipped with an electromagnetic Energy Saving Base (ESB) which uses only 50% of the power when the motor is not under load, dramatically increasing the operating life of the electromagnet, and a Magnetic Field Shape Control (MFSC) system which provides maximum holding power on thin material. A Magnetic Power Adhesion Control (MPAC) module detects adequate adhesive force of electromagnetic base before allowing drill activation for safe operation.

FEATURES
• 1-3/8" diameter x 2" depth of cut
• Ultra compact 14-3/4" working height (with coolant bottle)
• Adjustable cutter guard with built-in chip breaker
• Through spindle coolant system with removable reservoir
• Little maintenance with no gib adjustment and extreme accuracy
• Fewer parts which results in less run-out
• Lightweight – only 22 pounds
• Safe magnet™ circuitry recognizes magnetic holding power
• Spring slug ejecting arbor system
• Magnet is 1/3 smaller, lighter and yet stronger
• Magnet uses 50% power when motor is not under load
• Maintenance free rail guide system
• Advanced motor for easy field service
• All aluminum parts are heat treated for rigidity

SM-D1
$7
44.64

D-2X Magnetic Base Drill
The D2x is a powerful magnetic drilling machine with a high-torque 1260 watt electric motor and a 2" (51 mm) hole capacity in 3" (76 mm) thick material. It features a revolutionary service-friendly design which incorporates a semi-automatic, self-adjusting gib that requires little maintenance and provides accurate hole cutting. A unique replaceable spline on the end of the armature shaft reduces maintenance and labor costs.

Equipped with an electromagnetic Energy Saving Base (ESB), the D2x uses only 50% of the power when the motor is not under load, which dramatically increases the operating life of the electromagnet. A Magnetic Field Shape Control (MFSC) system provides maximum holding power on thin material.

A Magnetic Power Adhesion Control (MPAC) module detects an adequate adhesive force of electromagnetic base for safe operation.

FEATURES
• 2" diameter x 2" depth of cut
• Unique self-adjusting gib system extends cutter life
• Through-spindle coolant system with integrated reservoir
• Safe magnet™ circuitry recognizes magnetic holding power
• Powerful 1260W motor and all metal housing make the D2x a production tool
• 2-speed gearbox works with twist bits to 7/8" and annular cutters to 2" diameter
• Integrated gearbox housing with slide
• Adjustable cutter guard with built-in chip breaker
• Semi-automatic gib backlash adjustment
• Energy Saving Base (ESB)
• Magnetic Power Adhesion Control (MPAC)
• Magnetic Field Shape Control (MFSC)

SM-D-2X
$15
53.57

All Prices Subject To Change Without Notice 020616