GRAB-N-GO - Galvanized Steel Sheet 

Galvanized Steel Sheet Grade
ASTM A 653 These sheets are produced from rimming, capped, or semi-killed steel, and are intended for uses involving simple bending or moderate forming. They may be bent flat on themselves in any direction at room temperature without cracking. The zinc coating will withstand bending without flaking when tested in accordance with ASTM A 525. The coating is applied by the continuous hot-dip process, producing a tight coat of prime spelter of the 1.25 oz. per square foot coating class.

Analysis ...........................  ASTM A 569
.........................................  ASTM A 1008
.........................................  ASTM A 653

Carbon .............................  0.15 Max.
Manganese .......................  0.60 Max.
Phosphorus ......................  0.035 Max.
Sulphur ............................  0.040 Max.
Galvanized Steel Sheet

 
THICKNESS W  x  L
12" x 48"
W  x  L 
24" x 48"
W  x  L 
36" x 48"
W  x  L 
48" x 48"
26 GA. $13.55 $17.11 ----- $24.21
24 GA. 14.25 18.51 ----- 27.02
22 GA. 15.17 20.35 ----- 30.70
20 GA. 16.09 22.19 ----- 34.38
18 GA. 17.93 25.87 ----- 41.74
16 GA. 19.77 29.55 ----- 49.10
14 GA. 22.07 34.15 ----- 58.30
12 GA. 26.67 43.35 60.35 -----
10 GA. 31.27 52.55 ----- -----


Galvanized Steel Sheet
Pre-Cut

All Prices Subject To Change Without Notice 040117