HAND TOOLS - Punches 

Center Punches
Softened and Tapered Striking end reduces potential to chip
Ground surface for ease of identification
Precision Hardened working ends
Used For Marking Center Lines and Pilot Drill Locations
Meets or exceeds ASME B107.47


 
CENTER PUNCH
WORKING
END
STOCK
SIZE
OVERALL
LENGTH
ITEM # PRICE
Pointed 1/4" 4-1/4" 82269 $7.08
Pointed 3/8" 5" 82270 7.08
Pointed 7/16" 5-1/2" 82271 7.80

82271
Starter Punches
Softened and Tapered Striking end reduces potential to chip
Ground surface for ease of identification
Precision Hardened working ends
Designed For Both Starting and Installing Pins and Rivets
Meets or exceeds ASME B107.47


 
STARTER PUNCHES
POINT
DIAMETER
STOCK
SIZE
OVERALL
LENGTH
ITEM # PRICE
5/32" 3/8" 5" 82282 $7.92
3/16" 3/8" 5" 82283 8.62
1/4" 1/2" 6" 82284 9.46

82284
Pin Punches
Softened and Tapered Striking end reduces potential to chip
Ground surface for ease of identification
Precision Hardened working ends
Used For Final Removal To Drive Out Pins and Rivets
Meets or exceeds ASME B107.47


 
PIN PUNCHES
POINT
DIAMETER
STOCK
SIZE
OVERALL
LENGTH
ITEM # PRICE
3/32" 5/16" 4-3/4" 82272 $5.78
1/8" 5/16" 5" 82273 6.72
5/32" 5/16" 5-1/4" 82274 7.08
3/16" 5/16" 5-1/2" 82275 7.08
1/4" 3/8" 7" 82276 6.86
5/16" 1/2" 7" 82277 8.62

82277
Long Taper Punches
Softened and Tapered Striking end reduces potential to chip
Ground surface for ease of identification
Precision Hardened working ends
Used For Final Removal To Drive Out Pins and Rivets
Meets or exceeds ASME B107.47


 
LONG TAPER PUNCHES
POINT
DIAMETER
STOCK
SIZE
OVERALL
LENGTH
ITEM # PRICE
1/8" 3/8" 8" 82278 $9.46
5/32" 1/2" 8-1/2" 82279 10.18
3/16" 1/2" 9" 82280 15.38
1/4" 5/8" 11" 82281 13.00

82280
28 pc. Transfer Punch Set
(3/32-1/2 inch)

Undersize .0025" .
Used for transferring of threaded, drilled and tapped holes.
Black oxide finish.
Heat treated tempered tool steel for longer life.

8600-0041
$19.95

All Prices Subject To Change Without Notice 030117