MACHINIST TOOLS - Precision Tools 

4 PC. Small Hole Gauge Set
Gauging surface is a full half round with a flat bottom which permits use in smallest
   of shallow holes, slots, grooves, etc.
Hole size is obtained by measuring over the outside of the contact points with a
   micrometer.
Set range 1/4" up to 1/2".
Complete in a fitted pouch.

4400-0008

$
17.25
6 PC. Telescoping Gauge Set
#1 Plunger or gauge expands on hole to be measured.
#2 Locked in place and the gauge is removed from hole.
#3 Final hole size is obtained by measuring over the contact points with a micrometer.
Set range 5/16" up to 6".
Complete in a fitted pouch.

4200-0255

$
24.95
25 PC. Radius Gauge Set
Five different gauging surfaces on each gauge for both concave and convex radii.
Made of stainless steel.
With handy gage holder.
Set range 1/64" to 1/2".
Complete in a fitted pouch.

4901-0040

$
37.95
6" Dial Caliper
Covered rack for longer caliper life, keeps chips out.
Measuring faces hardened, ground and lapped.
Made from hardened stainless steel.
Satin chrome finish, no glare.
Reads I.D., O.D. and Depth.
.001" Graduation.
.100" Revolution.
Complete with fitted case.

4100-0202

$
28.95
6" Extra Large LCD Digital Caliper
Inside, Outside, and Depth Measurements
Graduation: 0.01mm, 0.0005in, 1/128in fraction
3 Button: (mm / inch / fraction.) - (on, off) - (zero)
On/Off Switch with Automatic Shutoff
Stainless Steel Frame
Extra Battery Included

01412A

$
29.95
0-1" Micrometer
Hardened and ground spindle.
Carbide measuring faces.
.0001" Graduation.
Adjustable key.
Ratchet stop.
Lock nut.
Complete with fitted case.

4200-0001
$
25.95
0-1" Digital Micrometer
Easy to read mechanical digital counter (.001"), vernier on spindle reads .0001".
Hardened and ground spindle.
Carbide measuring faces.
Adjustable key.
Ratchet stop.
Lock nut.
Complete with fitted case.

4200-0020

$
46.95
0-1" Electronic Micrometer
Easy to read LCD digital counter .0001".
Hardened and ground spindle.
Battery installed and ready to use.
Carbide measuring faces.
Ratchet stop.
Lock nut.
Adjustable key.
Complete with fitted case.

4200-0235

$
99.95
0-1" Dial Indicator
Series 2.
Stainless steel parts.
Hardened contact point.
Lug back with 1/4" hole.
Rotatable bezel with clamp.
Conforms to AGD standards.

4400-0001

$
19.65
Magnetic Base
Fine adjustment included for fast and easy set up.
Scribe opening hole 5/32".
Total height 9".
80 lbs. pull magnet.
Easy to use on/off switch.
Base foot print 2-3/8" x 1-3/4".
Holds all types of dial indicators.

4401-0001

$23
.95
4 pc. Combination Square Set (12 inch blade)
Set includes: square head, center head, protractor and blade.
Double indexed protractor is graduated 180 in both directions.
Graduation: 4R-8ths, 16ths, 32nds, 64ths
Blade made of hardened stainless steel.
Microfine graduation.

4901-0003

$61.95

All Prices Subject To Change Without Notice 122815