SHEET - Galvanized 

Galvanized Steel Sheet Grade
ASTM A 653 These sheets are produced from rimming, capped, or semi-killed steel, and are intended for uses involving simple bending or moderate forming. They may be bent flat on themselves in any direction at room temperature without cracking. The zinc coating will withstand bending without flaking when tested in accordance with ASTM A 525. The coating is applied by the continuous hot-dip process, producing a tight coat of prime spelter of the 1.25 oz. per square foot coating class.

Analysis ...........................  ASTM A 569
.........................................  ASTM A 1008
.........................................  ASTM A 653

Carbon .............................  0.15 Max.
Manganese .......................  0.60 Max.
Phosphorus ......................  0.035 Max.
Sulphur ............................  0.040 Max.
Galvanized Steel Sheet
 
GAUGE SHEET  
SIZE
WEIGHT PER
SQ. FOOT
WEIGHT PER SHEET
26 GA. 48" x 96" 0.9065 29.01
26 GA. 48" x 120" 0.9065 36.26
24 GA. 48" x 96" 1.1560 36.99
24 GA. 48" x 120" 1.1560 46.24
22 GA. 48" x 96" 1.4060 44.99
22 GA. 48" x 120" 1.4060 56.24
20 GA. 48" x 96" 1.6560 52.99
20 GA. 48" x 120" 1.6560 66.24
18 GA. 48" x 120" 2.1560 86.24
16 GA. 48" x 120" 2.6560 106.24
14 GA. 48" x 120" 3.2810 131.14
12 GA. 48" x 120" 4.5310 181.24
10 GA. 48" x 120" 5.7810 231.24
       SPECIFICATION:   Commercial Quality - 14 Ga. & Heavier
       SPECIFICATION:   LFQ 16 Ga. & Lighter     ASTM-A-653

Galvanized
Steel Sheet

All Prices Subject To Change Without Notice 012015