SPECIALS 

GAL-Z GALVANIZED RECTANGULAR and SQUARE TUBE
• Galvanized Coating Inside and Out
• Sold in Full Lengths Only








 

ITEM # DIMENSIONS LENGTH was NOW
CO-00137 1-1/4" x 1-1/4" x .083w 24 foot $64.08    $30.00   
CO-00138 1-1/2" x 1-1/2" x .083w 20 foot 64.80 31.80
CO-00139 1-1/2" x 1" x .083w 20 foot 53.40 27.00

Air Needle Scaler
• Ideal for Scaling & Rust Removal
• Comes with 19 High Tension Steel Needle
• Piston Stroke: 1-1/8"
• Blows Per Minute: 4,600
• Air Consumption: 4 CFM
• Air Pressure: 90 PSI
• Inlet Size: 1/4" NPT


30078A
 was $119.95
NOW $94.45
Standard Duty Steel Strapping
Size: 1/2" wide x .023" thick
Nominal Breaking Point 1392 lbs.
Approx. Weight 95 - 100 lbs.
Approx. Length: 2450 feet
Finish: Painted and Waxed
Winding: Oscillated

 
177007
 was $125.25
NOW $118.99
Microfiber Towels - Blue
• A great combination of cleaning power, economy and durability, these are the perfect
   towel for nearly all cleaning applications.
• 12 pcs. 15" x 15"
 
W915100B
 was $14.99
NOW $12.50
E71T-GS Gasless Flux Cored Mild Steel Mig Wire
COLOR CODE: PINK LABEL
• This general purpose mig wire is ideal for auto body repair and light fabrication on most    thin metals.
• High carbon content produces great welds on carbon steels and galvanized steels.
• Maximum convenience - no C02 or Argon C02 gas shielding required.
• Use DC straight polarity.
• 84,350 PSI Tensile Strength.
• Barium Free.


 
WIRE SIZE SPOOL SIZE ITEM # was NOW
.030" 2 lbs. 42300-F $24.68    $22.21   
.030" 10 lbs. 42301-F 98.78 88.90
.035" 2 lbs. 42302-F 23.44 21.10
.035" 10 lbs. 42303-F 92.60 83.34


42300-F
(shown)
Lever Binder
• All components are forged, no cast parts
• Forged binders are lighter and stronger than cast binders
• Under equal force a forged handle will yield and bend while a cast handle may break

48305
TYPE: LEVER
CAPACITY: 5/16" - 3/8"
WORKING LOAD LIMIT: 5400 lbs.
48305
 was $49.95
NOW $44.96
Ratchet Binder
• All components are forged, no cast parts
• Forged binders are lighter and stronger than cast binders
• Under equal force a forged handle will yield and bend while a cast handle may break

48365
TYPE: RATCHET
CAPACITY: 5/16" - 3/8"
WORKING LOAD LIMIT: 5400 lbs.

48366
TYPE: RATCHET
CAPACITY: 1/2"
WORKING LOAD LIMIT: 9200 lbs.
48365
 was $87.44
NOW $78.70

48366
 was $94.26
NOW $84.83
Blue Pilovic Air Hose
A lightweight, economical general purpose hose for carrying air, water, and many
spray solutions. Pliovic is suitable for a wide range of industrial, construction, agricultural hand sprayers, and many multipurpose applications. Suitable for working pressures of up to 250 PSI. Weather and abrasion resistant.


 
HOSE
I.D.		 HOSE
O.A.L.		 HOSE
O.D.		 ITEM # was PRICE
1/4" 25' .500"   BPH1425 $20.40 $18.40
1/4" 50' .500"   BPH1450 35.88 32.29
1/4" 100' .500"   BPH14100 60.52 54.47
3/8" 25' .656"   BPH3825 23.34 21.01
3/8" 50' .656"   BPH3850 42.52 38.27
3/8" 100' .656"   BPH384100 79.96 71.78

BPH3850
(shown)
Pipe Wrap
• Non-corrosive, pressure sensitive adhesive provides corrosion protection for metal and    plastic pipes.
• 10 mil film thickness with excellent moisture resistance.
• 2" x 100'
50045
 was $11.25
NOW $7.99

4-1/2" CC-Grinding Discs
• 40% more productivity due to ultimate stock removal rates compared with reinforced    grinding wheels
• 50% less noise and vibration during use
• As tough and safe as a reinforced grinding wheel and 100% increased aggressiveness
• 5/8-11 threaded arbor
• 13,300 max rpm
• Type 29
61220-P
 was $9.46
NOW $7.99
Pipe Cutters
Fast, clean pipe cutting by hand or power. Extra- long shank protects adjustment threads, while an extra large handle is provided for quick, easy adjustment. Can be converted to
3-wheel cutter by replacing rollers with cutter wheel, or the 2A and 4S can be ordered as
3-wheel model for use in areas where a complete turn is not possible.
 
ITEM
#		 MODEL
#		 PIPE
CAPACITY		 was NOW
32820 2-A 1/8" - 2" $161.84 $145.66
32845 4-S 2" - 4" 441.86 397.67

32820
(shown)
Zynolyte Spray Primer
• For metal, wood and fiberglass
• Use under lacquers, epoxies and enamels
• Dries to the touch in 10 minutes-sand in 30 minutes

11 oz. Aerosol



 

COLOR ITEM # PRICE PRICE
   Light Gray Z8072 $5.74    $4.88   
   Black Z8078 5.74 4.88
   Red Oxide Z8074 5.74 4.88

Z8074
(shown)
Tongue and Groove Plier
• Right angle teeth grip in all directions for maximum bite and minimum wear.
• Patented undercut tongue and groove design assures, no slip jaw action.
• Patented reinforcing edge minimizes stress breakage.
• Patented PermaLockฎ fastener eliminates nut and bolt failures.
• Distinctive CHANNELLOCK BLUE comfort grips.


 
ITEM # ADJUSTMENTS LENGTH CAPACITY was NOW
  460 8 16-1/4" 4-1/4" $32.41 $29.95
  480 12 20-1/4" 5-1/2" 63.48 59.95


480
(shown)

Mini Magnet Squares
• At just 2-5/16" in height, Mini Magnets provide low profile holding of stock in tight,
  hard to reach areas.
• Use as many as needed for light duty holding of stock at multiple points for greater    accuracy in fixturing with odd-shaped stock.
• Perfect for use around the shop, and compact enough to carry along for use out in
   the field.

Max. Pull Force   25 LBS
Dimension           2-5/16 x 2 x 5/8"
Angles                30บ, 60บ, 45บ, 90บ

 
MS346AT
 was $11.86
NOW $10.67
Permaloc Wire Rope Slings
• IWRC resists crushing better than FC rope
• Reserve strength - integrity of eye not solely dependent upon steel sleeve
• 3/8" diameter 6 x 19 IWRC
LENGTH RATED CAPACITY (lbs.) MFG # ITEM # was NOW
 FEET VERTICAL CHOKER BASKET        
6 2,800 2,200 5,800 38-I-EE x 6 ft. 5400-81100 $24.85 $22.37
8 2,800 2,200 5,800 38-I-EE x 8 ft. 5400-81110 28.35 25.52
10 2,800 2,200 5,800 38-I-EE x 10 ft. 5400-81120 31.85 28.67
WARNING  Do Not Exceed Rated Capacities.    Rating must be reduced when slings are used at angles of less than 90บ from horizontal.
Carbon Steel Round Dies
Round Adjustable Dies are designed for cutting external screw threads, either by hand, using a die stock or by machine, using a floating die holder. They also can be used to cut smaller or larger, than factory setting, by turning the adjusting screw in or out. Dies are manufactured with a 2-3 thread chamfer on front face and a 1-1ฝ thread chamfer on the rear. A solid die has the capacity to cut more precisely than a split die.  Making this a better choice in the smaller diameters.
 
THREAD SIZE ITEM # was NOW
1" Round Carbon Dies (solid)
1/4" - 20 11470-S $9.72   $8.26   
1/4" - 28 11473-S 9.72 8.26
5/16" - 18 11477-S 9.72 8.26
5/16" - 24 11479-S 9.72 8.26
3/8" - 16 11484-S 9.72 8.26
3/8" - 24 11486-S 9.72 8.26
7/16" - 14 11488-S 9.72 8.26
7/16" - 20 11490-S 9.72 8.26
1/2" - 13 11496-S 9.72 8.26
1/2" - 20 11498-S 9.72 8.26
1-1/2" Round Carbon Dies (adjustable)
9/16" - 12 12029-S $14.45    $12.28   
9/16" - 18 12031-S 14.45 12.28
5/8" - 11 12034-S 14.45 12.28
5/8" - 18 12036-S 14.45 12.28
3/4" - 10 12042-S 14.45 12.28
3/4" - 16 12044-S 14.45 12.28
2" Round Carbon Dies (adjustable)
7/8" - 9 12147-S $23.92    $20.34   
7/8" - 14 12149-S 23.92 20.34
1" - 8 12151-S 23.92 20.34
1" - 14 12155-S 23.92 20.34

1" Solid Die









1-1/2" & 2" Adjustable Die

Items are limited to stock on hand. No rain checks or back orders.
All Prices Subject To Change Without Notice. 090117