WELDING - Arc Rod  
 
6013 Welding Electrode (General Purpose)
COLOR CODE: RED LABEL - A mild steel, general purpose, all position electrode that can be used on AC or DC (straight or reverse polarity) welding current. Small sizes are well suited for welding thin materials where low heat input is required. Especially useful for welding where poor fit-up (wide gaps) conditions exist.
Ideal for use on weld joints with poor fit-ups.
Light to medium penetrating, all purpose electrode.
Used on light gauge metal, sheet metal and ductwork.
For metal buildings and structures.

SIZE
ROD
SIZE
BOX
ITEM # PRICE
1/16" 1 lbs. 40102-F $12.34
5/64" 1 lbs. 40202-F 11.10
3/32" 1 lbs. 30301-F 6.78
3/32" 5 lbs. 30305-F 21.30
3/32" 50 lbs. 30350-F 136.00
1/8" 1 lbs. 30401-F 6.16
1/8" 5 lbs. 30405-F 19.74
1/8" 10 lbs. 30410-F 34.56
1/8" 50 lbs. 30450-F 161.76
5/32" 5 lbs. 30505-F 18.50
5/32" 10 lbs. 30510-F 33.32
5/32" 50 lbs. 30550-F 160.54
6011 Welding Electrode (Vertical & Overhead)
COLOR CODE: YELLOW LABEL - A mild steel, general purpose all position electrode with stable arc characteristics and deep penetration. Use on AC or DC reverse polarity welding current. Fast freezing or rapid solidification of the weld metal facilitates welding in the vertical or overhead positions.
Welding through medium amounts of paint, rust, dirt.
High penetrating, all purpose electrode.
Fence or post fabrication / repairs.
For galvanized steel work.


 
SIZE
ROD
SIZE
BOX
ITEM # PRICE
3/32" 1 lbs. 31101-F $6.78
3/32" 5 lbs. 31105-F 20.36
1/8" 1 lbs. 31201-F 6.78
1/8" 5 lbs. 31205-F 19.74
1/8" 10 lbs. 31210-F 34.56
1/8" 50 lbs. 31250-F 153.12
5/32" 5 lbs. 31305-F 20.98
5/32" 10 lbs. 31310-F 31.48
5/32" 50 lbs. 31350-F 169.18

7014 Welding Electrode (High Deposition)
COLOR CODE: ORANGE LABEL - A mild steel, all position iron powder electrode designed to increase deposition rates and welding speeds. This electrode provides good arc stability, low spatter and produces medium to low penetration. Can be used on AC or DC (straight or reverse polarity).
Light to medium penetrating, all purpose electrode.
Used where higher deposition rates & faster travel speeds are required.
For heavy sheet metal.
Smooth, fine-rippled bead appearance.


 
SIZE
ROD
SIZE
BOX
ITEM # PRICE
3/32" 5 lbs. 31105-F $22.22
1/8" 5 lbs. 32105-F 20.36
1/8" 10 lbs. 32110-F 33.96
5/32" 5 lbs. 32205-F 19.14
5/32" 10 lbs. 32210-F 31.48

AC 7018 Welding Electrode (High Strength - Low Hydrogen)
COLOR CODE: GREEN LABEL - A low hydrogen 7018 electrode designed to weld best when used with smaller 208/230 volt, single phase AC welders. This electrode provides a smooth, stable arc and has excellent restart capabilities. It is designed for welding low, medium and high-carbon steels and some higher strength low-alloy steels.
For high strength (70,000 PSI min. tensile strength) welding requirements.
Designed to be used with smaller 208/230 volt, AC welders.
Low hydrogen electrode for low, medium and high carbon steels.
For frames, trailer hitches and chassis.


 
SIZE
ROD
SIZE
BOX
ITEM # PRICE
3/32" 1 lbs. 30680-F $6.78
3/32" 5 lbs. 30681-F 22.22
1/8" 1 lbs. 30684-F 6.78
1/8" 5 lbs. 30685-F 22.84
1/8" 10 lbs. 30686-F 34.56
1/8" 50 lbs. 30687-F 169.18
5/32" 5 lbs. 30689-F 17.90
5/32" 10 lbs. 30690-F 36.42
5/32" 50 lbs. 30691-F 167.94

7018 Welding Electrode (High Strength - Low Hydrogen)
COLOR CODE: BLUE LABEL - A low hydrogen iron powder type electrode that produces X-Ray quality welds. It can be used in all positions and works best on DC reverse polarity welding current, providing excellent start and restart capabilities.
Used where higher strength and resistance to cracking is required.
Field erections and steel structures.
For frames, trailer hitches and chassis.
Low hydrogen electrode for low, medium and high carbon steels.
For high strength (70,000 PSI min. tensile strength) welding requirements.


 
SIZE
ROD
SIZE
BOX
ITEM # PRICE
3/32" 1 lbs. 30701-F $6.16
3/32" 5 lbs. 30705-F 22.22
1/8" 1 lbs. 30801-F 6.78
1/8" 5 lbs. 30805-F 20.98
1/8" 10 lbs. 30810-F 34.56
1/8" 50 lbs. 30850-F 164.24
5/32" 5 lbs. 30905-F 19.14
5/32" 10 lbs. 30910-F 34.56
5/32" 50 lbs. 30950-F 154.36

Super Strength X1000 Stainless Steel Electrode
FOR WELDING ALL STEELS
The absolute ultimate computer-engineered, high alloy electrode for welding every known grade of steel using every known stick electrode power source. The first truly AC-DC mineral-coated high alloy that can be used by anyone, regardless of prior welding experience. Superior combination of tensile strength and elongation, together with an arc so ionized you cannot short it out.
Use any AC or DC constant current power source designed for stick welding.
On DC, use reverse polarity.
128,000 PSI

44556-F    3/32"     1/2 lbs.     $23.44
44557-F    3/32"        1 lbs.     $35.80
44559-F    1/8"         11 oz.     $20.98
44560-F    1/8"          1 lbs.     $34.56

High Nickel 99% Electrode (Machinable)
NON-CONDUCTIVE FLUX COATING
Ideally suited for welding of all grades of gray cast iron, particularly thin sections & welds requiring highest possible machinability.
Use AC or DC power source. On DC use reverse or straight polarity.
55,000 PSI.
BHN 155.

45300-F    3/32"      1/2 lbs.    $59.26
45400-F    1/8"        1/2 lbs.    $59.26

Hard Cast Iron Electrode (Non-Machinable)
NON-CONDUCTIVE FLUX COATING
Specially developed for welding dirty, heat-affected, contaminated and oxidized cast iron. For all cast iron repair welding not requiring machinable weld metal. Will bond to severely contaminated or oxidized cast iron surfaces due to its combination of arc drive, flux coating and weld metal composition. As such, it is ideally suited to the cladding of heat oxidized or oil impregnated castings, prior to joining with high nickel alloys. Use also for welding broken cast iron where machinability of the weld is not required.
Use DC reverse (+) or straight polarity, or AC.
62,000 PSI.
Rockwell C39.

43400-F    1/8"    4 oz.    $11.10
43401-F    1/8    1 lbs.    $19.74

Supercote Hardfacing Electrodes
MODERATE IMPACT& ABRASION
Supercote is an excellent general purpose low cost hard surfacing rod for surfaces subjected to abrasive wear and impact. Crack resistant deposits can be forged.
Hardness: RC 52-58.
Use AC or DC reverse polarity.

42405-F    5/32"    5 lbs.    $38.26

Super Ni-Cast 55% Nickel Electrode (Machinable)
ULTIMATE ELECTRODE FOR ALL CAST IRONS
The state-of-the-art coated electrode for welding every known grade of cast iron, heavy sections or thin, and for joining these cast irons to steel. The computer controlled coating produces welds that represent the optimum relationship between tensile strength and machinability.
70,000 PSI.
Use any AC or DC constant current power source designed for stick welding.
On DC, use reverse polarity.

45460-F    3/32"    1/2 lbs.    $39.50
45464-F      1/8"    1/2 lbs.    $39.50

Aluminum Arc Rod #4043
ARC & TORCH WELDING LOW ALLOY ALUMINUM
Universal electrode for welding all cast, wrought and extruded aluminum, and all aluminum alloys in all positions.
Use DC constant current power sources. Reverse polarity.
Can also be used as a torch brazing alloy.
34,000 PSI.

45889-F      1/8"    1/2 lbs.    $25.92

All Prices Subject To Change Without Notice 110216